Announcement

Collapse
No announcement yet.

Gs3 drive sizing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cow
    replied
    Also something to keep in mind, the NEC requires the wires feeding the drive be sized at 125% of the drive input current rating. Of course, sometimes that can end up being a big deal when oversizing a drive.

    Leave a comment:


  • Ridgeline Mach
    replied
    Yes. BUT, if you cannot set parameter P0.01 to the full load amp rating of your motor, then you'll need to purchase a separate overload device to protect the motor from burnout.

    Leave a comment:


  • don@pacmet.us
    started a topic Gs3 drive sizing

    Gs3 drive sizing

    is it possible to use a 100hp Gs3 drive on a 60hp motor?
Working...
X