Announcement

Collapse
No announcement yet.

Timer question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rmattcnc
    replied
    Got it, works like a champ! Once again thanks

    Leave a comment:


  • bcarlton
    replied
    It can go to any free V memory location. There is nothing special about V2000

    Leave a comment:


  • rmattcnc
    replied
    Bernie, Appreciate the help. One question if you font mind, I am using V2000 memory slot for my RTD modules. can I grab an open V memory location? and if so what number do I put in ?

    Leave a comment:


  • Cow
    replied
    My first thought was some self resetting timers. No PLC clock required.

    Leave a comment:


  • bcarlton
    replied
    Try this small two rung effort.
    Attached Files

    Leave a comment:


  • BobO
    replied
    Probably will have to do it the way you are.

    Leave a comment:


  • rmattcnc
    replied
    I am using the DL250

    Leave a comment:


  • BobO
    replied
    What PLC are you using?

    Leave a comment:


  • rmattcnc
    started a topic Timer question

    Timer question

    I am looking to make a stir pump come on for 15 minutes every 2 hours, is there another function to use for this instead of using a bunch of comparative contacts using the PLC clock?

    examples would be appreciated
Working...
X