Announcement

Collapse
No announcement yet.

Through Port Programming

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • OkiePC
    replied
    I think what you are asking for is port-pass through like what Red Lion supports. It allows you to use com port redirect software on your PC to access a PLC serial port through the HMI. It has some limitations but can be handy for hard to access locations.

    Leave a comment:


  • Kemner
    replied
    Thank you for the quick reply. I'll have to leave a port on the plc open then.

    Leave a comment:


  • scott.lawrence
    replied
    well, you can't program one through another, but you can use the two to communicate with one another.

    The Click uses Click programming software, and the C-More software for programming the HMI

    Leave a comment:


  • Kemner
    started a topic Through Port Programming

    Through Port Programming

    Was wondering if I could program this: (C0-01DD2-D) PLC through this: (EA9-T6CL-R) HMI.
    Any help would be greatly appreciated, thank you for taking the time to read this.
Working...
X