Announcement

Collapse
No announcement yet.

D2-260 Upgrade

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • daakers
    replied
    Originally posted by bfitz View Post
    So, as long as you aren't using a D2-CTRINT in your system, a D2-262 is a drop in replacement, speed boost for a D2-260? Cool! I have a 260 here that struggles a little on ethernet comms. I'm thinking that the scan times are affecting that a little (don't remember offhand what they were, but it's at least in the dozens of ms). A faster processor might shovel data to the ECOM100 a little faster.
    That's what it looks like to me. Good deal it's cheaper than the D2-260 also!

    Leave a comment:


  • bfitz
    replied
    So, as long as you aren't using a D2-CTRINT in your system, a D2-262 is a drop in replacement, speed boost for a D2-260? Cool! I have a 260 here that struggles a little on ethernet comms. I'm thinking that the scan times are affecting that a little (don't remember offhand what they were, but it's at least in the dozens of ms). A faster processor might shovel data to the ECOM100 a little faster.

    Leave a comment:


  • daakers
    replied
    Originally posted by Do-more PE View Post
    Here is the appropriate manual chapter: https://cdn.automationdirect.com/sta...user/appxj.pdf
    Thanks I'm another job (not in the office) and these folks wanted an answer quick. You guys are great. Looks like all my existing hardware is good to go. Again thanks!

    Leave a comment:


  • Do-more PE
    replied
    Here is the appropriate manual chapter: https://cdn.automationdirect.com/sta...user/appxj.pdf

    Leave a comment:


  • daakers
    started a topic D2-260 Upgrade

    D2-260 Upgrade

    We have a customer with an older system, that we are going to upgrade. The system has a main rack with a D2-260 CPU, H2-ECOM100 and H2-ERM. We also have some expansion I/O using the D2-CM and D2-EM. If we upgrade to the D2-262, what do else would we need to upgrade. I'm guessing firmware, but not sure about the older ECOM and ERM units, will this all still work as is with the D2-262?? I don't want to run into a problem in the middle of the upgrade.
    Thanks ahead for any information.
Working...
X