Announcement

Collapse
No announcement yet.

P2000 OLED screen not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kewakl
    replied
    https://www.automationdirect.com/adc/Return/Return

    I was looking at the RMA page, my understanding of the wording : 'In-Warranty' return for 'defective' hardware seems more fitting

    Leave a comment:


  • Onceover
    replied
    So it sounds like this is a hardware failure. Iíve had it for about two weeks. Iíll contact automation direct and get it exchanged.

    Leave a comment:


  • kewakl
    replied
    How long have you had it?
    i think under 30 days you can send it back.
    if over 30??
    ask for cross-ship - maybe

    Leave a comment:


  • Onceover
    replied
    I sure have. No response.

    Leave a comment:


  • Ridgeline Mach
    replied
    Have you tried pushing the buttons below the OLED?

    Leave a comment:


  • Onceover
    started a topic P2000 OLED screen not working

    P2000 OLED screen not working

    This is my first time ever playing with a PLC, got everything to boot up and built some practice programs to get the hang of it. Everything was working as expected, screen and menus were working on the CPU. Went to turn the unit on today and everything works as it did earlier, but the LED screen on the CPU is blank. Nothing seems to wake it up.

    Did I somehow manage to disable the screen in my fiddling? Or did the screen somehow die?

    Thanks!
Working...
X