Announcement

Collapse
No announcement yet.

P2000 remote IO and data statistics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kewakl
    replied
    Nice. Quick.
    Too bad that I was already reading this post when I got the email notification.

    Leave a comment:


  • ADC_CommTeam02
    replied
    This will be in the next major release of the software that is currently planned for later this year. It will display a warning & in the problem report on compile and/or project transfer.

    Click image for larger version

Name:	warning.png
Views:	65
Size:	28.0 KB
ID:	128846

    Click image for larger version

Name:	endstatement.png
Views:	64
Size:	29.9 KB
ID:	128845

    Leave a comment:


  • RBPLC
    replied
    I second the warning message prior to uploading to controller. This has gotten me more than once.

    Leave a comment:


  • kewakl
    replied
    Originally posted by z28z34man View Post
    I see that happen quite often, it is an easy mistake to make. Wondering out loud if it is possible to have the P suite give the user a warning if you try to put code after an end instruction.

    Kind of like the program check rules in domore.

    [edit] add quote because out of sequence post/add 'program check' wording
    Last edited by kewakl; 02-26-2020, 02:33 PM.

    Leave a comment:


  • bsinkovich
    replied
    WHAT! an END where it should not be? Never.

    Leave a comment:


  • z28z34man
    replied
    I see that happen quite often, it is an easy mistake to make. Wondering out loud if it is possible to have the P suite give the user a warning if you try to put code after an end instruction.

    Leave a comment:


  • kewakl
    replied
    Thanks for the resolution.

    Leave a comment:


  • highvoltage50
    replied
    thanks for the help i had an end in logic

    Leave a comment:


  • highvoltage50
    replied
    program example
    Attached Files

    Leave a comment:


  • kewakl
    replied
    Originally posted by techme View Post
    1) Is the output tag used elsewhere in the logic?
    2) PLC in run?
    3) Instruction being scanned? ( make sure no END instruction before the rung on which the instruction is placed.)
    4) Is the rung the instruction is on enabled.
    5) You can move the rung that has the instruction to the top of you logic with no logic in front of it so it is enabled all the time and place an END on the next rung to test and make sure it is not other logic. ( If possible)

    Include a screenshot of logic or the project for more assistance.
    All of what techme said and

    3.a) if the DATA instruction is in a called task, is the task being called. --experience!

    Leave a comment:


  • techme
    replied
    1) Is the output tag used elsewhere in the logic?
    2) PLC in run?
    3) Instruction being scanned? ( make sure no END instruction before the rung on which the instruction is placed.)
    4) Is the rung the instruction is on enabled.
    5) You can move the rung that has the instruction to the top of you logic with no logic in front of it so it is enabled all the time and place an END on the next rung to test and make sure it is not other logic. ( If possible)

    Include a screenshot of logic or the project for more assistance.

    Leave a comment:


  • highvoltage50
    started a topic P2000 remote IO and data statistics

    P2000 remote IO and data statistics

    I am trying to use the data statistics function for 4 RTD values coming from a remote IO rack to get the max value and i am not getting any value in my output
Working...
X