Announcement

Collapse
No announcement yet.

Mosaic safety controller modules

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts


  • Mosaic safety controller modules

    Please add the rest of the modules Reer makes for the mosaic safety controller. I have already found myself going straight to their distributors to buy all of the components i needs as Automation Direct only sells a select few.


  • #2
    Thank you for the post and your interest in the Mosaic safety controllers. I have sent your request to the Product Manager.
    If you have an urgent issue, please contact AutomationDirect's Technical Support team at 1(800) 633-0405 or (770) 844-4200. Thank you

    Comment



    • #3
      Is the most recent firmware available?
      The units we purchased did not support some of the instructions which required some changes to the code we wrote before receiving the hardware. Firmware we received = 3.xx. It looks like the current version is 5.0. Otherwise very impressed.

      Comment



      • #4
        I spoke with the Product Engineer and the firmware is not field upgradeable. However, version 3.xx should work for you since the 5.0 version of the firmware is for the MOSAIC M1S which we do not currently offer. Double-check the module you have selected in your configuration and if you still have issues, please let our Tech Support Team assist you at 1(800) 633-0405. Thanks.
        If you have an urgent issue, please contact AutomationDirect's Technical Support team at 1(800) 633-0405 or (770) 844-4200. Thank you

        Comment

        Working...
        X