Announcement

Collapse
No announcement yet.

C-More v6.14 Siemens tags

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bcarlton
    replied
    Here is the addressing section for the Siemens S7-300. (But this is from 5.0, we don't have the higher level installed yet.)
    Attached Files

    Leave a comment:


  • kcolborne
    replied
    Help files

    I haven't been able to get the help files to work on the new version of the software.

    Can you copy and paste the allowed ranges here please?

    Leave a comment:


  • bcarlton
    replied
    The help file entry for S7-300 addressing shows the ranges allowed.

    Leave a comment:


  • kcolborne
    started a topic C-More v6.14 Siemens tags

    C-More v6.14 Siemens tags

    I have a new EA9-T8CL HMI screen connected via Ethernet to a Siemens S7-300 PLC.

    There seems to be an issue with addressing tags with an address higher than 254. When I try I get error code GUI-024

    Example:
    MW250 works
    MW300 gets error code

    M20.1 works
    M520.1 gets error code


    The addresses exist in the PLC as part of a standard block of code that I would prefer not to change. Any way to get the software to allow the addresses?
Working...
X